The previous studies of the backfill composite and fill mass did not consider the process of matrix formation. Studying the microstructure of hardened backfill composite allows for conducting its element analysis and investigating the process of matrix formation. The use of industrial waste in backfill composite formula and forming a backfill mass with preset properties is an urgent task. The study aims to investigate the microstructure of hardened backfill composite and the process of its matrix formation.
Samples for X-ray diffraction have been ground into a fine powder whereas samples for scanning electron microscopy have been selected from small cubes of approximately 1 cm size. For the microscopic analysis of samples, the Zeiss EVO18 equipment with an energy-dispersive X-ray spectroscopy system has been used. A comparative analysis of mixtures of various formulas has been conducted.
It has been proven that limestone and siliceous raw materials as well as C2S participate in the hydration process, whereas their share in the backfill composite reduces during hardening and is consumed to generate hydration products such as tobermorite and CSH gels. It has been established that adding zeolite ZSM-5 in the backfill accelerates the hydration reaction with generation of flake-like tobermorite that fills porous space, which ensures the formation of a denser matrix able to withstand increased loads.
The formation of artificial mass based on the backfill composite whose formula includes industrial waste allows for the environmental and technological development of geological resources, which can be possible only based on the principles of comprehensive approach.
2. Didmanidze O.N., Afanasev A.S., Khakimov R.T. Natural gas methane number and its influence on the gas engine working process efficiency. Zapiski Gornogo instituta = Journal of Mining Institute. 2021. Vol. 251. pp. 730–737. (In Russ.). DOI: 10.31897/PMI.2021.5.12
3. Tyulyaeva Yu.S., Khayrutdinov A.M. Creation of a backfill composite based on coal industry waste. Ugol = Ugol. 2024. № 10. pp. 24–27. (In Russ.). DOI: 10.18796/0041-5790-2024-10-24-27
4. Pshenin V.V. Determination of Parameters of Rational Placement of Oil and Petroleum Product Vapor Recovery Unit. International Journal of Engineering. 2025. Vol. 38 (2). pp. 362–367. DOI:10.5829/ije.2025.38.02b.10
5. Alieva L., Zhukov I.A. Upgrading rotary-percussion drilling of high-strength rocks by improvingthe structure of a rock-crushing blade-free tool. Ustoychivoe razvitie gornykh territoriy = Sustainable Development of Mountain Territories. 2024. Vol. 16. № 4. pp. 1681–1694. (In Russ.). DOI: 10.21177/1998-4502-2024-16-4-1681-1694
6. Maksarov V.V., Minin A.O., Vasilkov D.V. The use of high-frequency wave action for technological quality assurance of boring surfaces of products made of corrosion-resistant aluminum alloys. Tsvetnye metally = Non-ferrous metals. 2025. № 1. pp. 76–83. (In Russ.). DOI: 10.17580/tsm.2025.01.11
7. Babyr N.V. Topical Themes and New Trends in Mining Industry: Scientometric Analysis and Research Visualization. International Journal of Engineering. 2024. Vol. 37 (2). pp 439–451. DOI: 10.5829/ije.2024.37.02b.18
8. Kovalskiy E.R., Kongar-Syuryun Ch.B., Sirenko Yu.G., Mironov N.A. Modeling of rheological deformation processes for room and pillar mining at the Verkhnekamsk potash salt deposit. Ustoychivoe razvitie gornykh territoriy = Sustainable Development of Mountain Territories. 2024. Vol. 16. № 3. pp. 1017–1030. (In Russ.). DOI: 10.21177/1998-4502-2024-16-3-1017-1030
9. Korshak A.A., Pshenin V.V. Modeling of Water Slug Removal from Oil Pipelines by Methods of Computational Fluid Dynamics. Neftyanoe Khozyaystvo = Oil Industry. 2023. № 10. pp. 117–122. (In Russ.). DOI: 10.24887/0028-2448-2023-10-117-122
10. Nikitin V.I. Mathematical modeling of drilling fluid filter penetration into the bottom-hole of formation taking into account oil viscoplastic properties. Izvestiya Tomskogo politekhnicheskogo universiteta. Inzhiniring georesursov = Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering. 2023. Vol. 334. № 3. pp. 130–137. (In Russ.). DOI: 10.18799/24131830/2023/3/3760
11. Kongar-Syuryun Ch.B. Influence of mine water on the strength of artificial mass based on industrial waste. Ugol= Ugol. 2024. № 12. pp. 75–78. (In Russ.). DOI: 10.18796/0041- 5790-2024-12-75-78
12. Li X., Cao S., Yilmaz E. Polypropylene Fiber’s Effect on the Features of Combined Cement-Based Tailing Backfill: Micro- and Macroscopic Aspects. Minerals. 2024. Vol. 14. DOI: 10.3390/min14030212
13. Jin J., Yuan S., Lv Z., Sun Q. Development of Backfill Concrete Including Coal Gangue and Metakaolin and Prediction of Compressive Strength by Extreme Learning Machine. Minerals. 2022. Vol. 12 (3). DOI: 10.3390/min12030330