The concept of computation and experimental determination of safety and protectability of industrial facilities on parameters of risk of initiation of refusals, accidents and disasters taking into account possibility of regular and emergency situations is considered. The scientifically substantiated, normalized and controlled parameters of risks estimated by criteria of strength, life-time and survivability are its basis. Risks at the same time are estimated on probabilities of initiation of emergency situations and losses accompanying them at their interdependence. It is shown that generally safety is defined by ability of installations not to pass into emergency and catastrophic states with drawing significant damages to the person, a technosphere and environment; the risk is defined by probability of initiation on installation of adverse situations and possible losses from these situations; protectability is defined by ability of installation to resist to initiation and an evolution of adverse situations (refusals, accidents, disasters) in regular and emergency conditions. The new perspective direction for maintenance of conditions of safe service of industrial facilities is that which initially forms the level of their protectability, and this protectability is defined by the formed and acceptable risks. In this case the solution of basic problems of protectability, safety and risk has to be guided surely by the solution of problems of strength, a life-time, survivability in their direct interaction This circumstance is based on a quantitative estimation of conditions of service damages accumulation and on the analysis of conditions of transition from regular to the damaged and limit states of installation taking into account criteria of strength, fatigue life and survivability. The solution of practical problems of maintenance of strength, life-time and safety within of strength, life-time and risk-focused design assumes determination of nominal and local stresses from service loadings in the most loaded zones with use of characteristics of mechanical properties of constructional materials. In the paper it is put and solved the new scientific and almost important problem about risk-focused definition, maintenance, increase and a standartization of complex safety and protectability of technosphere installations by criteria of the acceptable and controlled risks.
2. Makhutov N.A. Safety of Russia. Legal, socio-economic and scientific-technical aspects. Vol. 2. Part 1. Scientific foundations of safety of the objects critical to national safety. Moscow: MGOF «Znanie», 2012. 896 p. (In Russ.).
3. Makhutov N.A. Safety and risks: system research and development. Novosibirsk: Nauka, 2017. 724 p. (In Russ.).
4. Shokin Yu.I. Probabilistic risk analysis of technical systems designs. Novosibirsk: Nauka, 2003. 174 p. (In Russ.).
5. Moskvichev V.V. Applied problems of structural strength and fracture mechanics of technical systems. Novosibirsk: Nauka, 2021. 796 p. (In Russ.).
6. Study and substantiation of machine strength and safety. Moscow: MGOF «Znanie», 2023. 832 р. (In Russ.).
7. Makhutov N.A., Morozov E.M., Gadenin M.M., Reznikov D.O., Yudina O.N. Coupled thermo-mechanical analysis of stress-strain response and limit states of structural materials taking into account the cyclic properties of steel and stress concentration. Continuum Mechanics and Thermodynamics. 2023. Vol. 35. № 4. рр. 1535–1545. DOI: 10.1007/s00161-022-01160-1
8. Makhutov N.A., Gadenin M.M., Reznikov D.O. Assessment of Extreme Thermo-Mechanical States of Engineering Systems under Operating Loading Conditions. Acta Mechanica. 2021. Vol. 232. № 5. pp. 1829–1839. DOI: 10.1007/s00707-020-02920-3
9. Makhutov N.A., Gadenin M.M. Technical diagnostics and risk monitoring for equipment of hydroelectric power plant. Razrushenie gidroagregata № 2 Sayano-Shushenskoy GES: prichiny i uroki: sb. materialov (Destruction of hydraulic unit № 2 of the Sayano-Shushenskaya HPP: causes and lessons: collection of articles). In 3 volumes. Vol. 1. Moscow: RusGidro, 2013. рр. 26–35. (In Russ.).
10. Gadenin M.M. Study of the regularities of resistance to deformation and damage accumulation under irregular low cycle loading. Inorganic Materials. 2022. Vol. 58. № 15. P. 1586–1593. DOI: 10.1134/S002016852215002X
11. Makhutov N.A., Gadenin M.M., Ivanov V.I. Scientific and Methodological Base for Technical Diagnostics of Potentially Hazardous Production Facilities. Bezopasnost Truda v Promyshlennosti = Occupational Safety in Industry. 2021. № 6. pp. 7–14. (In Russ.). DOI: 10.24000/0409-2961-2021-6-7-14
12. Altenbach H., Eremeyev V.A., Igumnov L.A. Multiscale Solid Mechanics. Strength, Durability, and Dynamics. Cham: Springer Nature, 2021. 499 p. DOI: 10.1007/978-3-030-54928-2
13. Kostogryzov A., Korolev V. Probability, Combinatorics and Control. London: IntechOpen, 2020. 322 p. DOI: 10.5772/intechopen.79802
14. Zamigulov E.A., Pertseva A.Yu. Occupational Risk Level Correction Methodology Based on the Results of Three-stage Control. Bezopasnost Truda v Promyshlennosti = Occupational Safety in Industry. 2024. № 1. pp. 41–43. (In Russ.). DOI: 10.24000/0409-2961-2024-1-41-43
15. Stepnov M.N. Probabilistic methods of assessment of characteristics of mechanical properties of materials and the load-bearing capacity of structural elements. Novosibirsk: Nauka, 2005. 342 p. (In Russ.).
16. Shakhabov M.M., Sivenkov A.B. Mechanical Characteristics of Steel Structures with Long Service Life in Case of Fire. Bezopasnost Truda v Promyshlennosti = Occupational Safety in Industry. 2024. № 1. pp. 7–15. (In Russ.). DOI: 10.24000/0409-2961-2024-1-7-15
17. Tsvetkov P. Nuclear Materials. London: IntechOpen, 2021. 138 p. DOI: 10.5772/intechopen.83315