References:
1. Razumnyy Yu.T., Rukhlova N.Yu., Rukhlov A.V. Energy efficiency of the coal mine main drainage: monograph. Dnepropetrovsk: Natsionalnyy gornyy universitet, 2016. 109 p. (In Russ.).
2. Timukhin S.A., Aleksandrov V.I., Makharatkin P.N. Innovative Approach to the Design of the Main Mine Drainage Systems. Gornoe oborudovanie i elektromekhanika = Mining Equipment and Electromechanics. 2018. № 1. pp. 44–46. (In Russ.).
3. Dolganov A.V. Hydroabrasive wear and economical efficiency of the dewatering installations of mines and ore mines. Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining informational and analytical bulletin (scientific and technical journal). 2019. № 5 (Spec. Iss. № 9). pp. 3–8. (In Russ.).
4. Ovchinnikov N.P. The Operating Experience of Sectional Pumps in Underground Kimberlite Mine «Mir». Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta = Bulletin of the Kuzbass State Technical University. 2017. № 5. pp. 119–126. (In Russ.).
5. Timokhin Yu.V., Palamarchuk T.N. The research results of the axial forces of the rotor and automatic settings. Sbornik nauch. tr. Donetskogo instituta zheleznodorozhnogo transporta (Collection of the scientific papers of the Donetsk Institute of Railway Transport). 2017. № 45. pp. 32–42. (In Russ.).
6. Palamarchuk N.V., Timokhina V.Yu., Palamarchuk T.N. Causes of unsatisfactory operation of the automatic balancing devices of centrifugal high-pressure pumps. Sbornik nauch. tr. Donetskogo instituta zheleznodorozhnogo transporta (Collection of the scientific papers of the Donetsk Institute of Railway Transport). 2016. № 42. pp. 65–71. (In Russ.).
7. Ostrovskiy V.G., Peshcherenko S.N. Calculation of the Rate Hydroabrasive Wear Interstage Seal Oil Pump. Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Geologiya, neftegazovoe i gornoe delo = Bulletin of the Perm National Research Polytechnic University. Geology, oil and gas, and mining. 2012. № 5. pp. 70–75. (In Russ.).
8. Stan M. On the Durability of Centrifugal Pumps. Fiability and Durability. 2018. № 1. pp. 193–198.
9. Dolganov A.V. The influence of hydro-abrasive depreciation of excretory elements on exploitation qualities of rotary pumps at copper and pyrites pits. Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining informational and analytical bulletin (scientific and technical journal). 2015. № 8. pp. 181–186. (In Russ.).
10. Patel M., Kumar A., Pardhi B., Pal M. Abrasive, Erosive and Corrosive Wear in Slurry Pumps — a Review. International Research Journal of Engineering and Technology. 2020. Vol. 7. Iss. 3. pp. 2188–2195.
11. Shen Z., Li R., Han W., Quan H., Guo R. Erosion Wear in Impeller of Double-Suction Centrifugal Pump due to Sediment Flow. Journal of Applied Fluid Mechanics. 2020. Vol. 13. Iss. 4. pp. 1131–1142.
12. Serrano R.O.P., Santos L.P., Viana E.M.F., Pinto M.A., Martinez C.B. Case study: Effects of sediment concentration on the wear of fluvial water pump impellers on Brazil's Acre River. Wear. 2018. Vol. 8. pp. 408–409. DOI: 10.1016/j.wear.2018.04.018
13. Ovchinnikov N.P. One of the ways to increase the durability of the sectional pump balancing ring. Zapiski Gornogo instituta = Journal of Mining Institute. 2021. Vol. 248. pp. 312–318. (In Russ.).
14. Ovchinnikov N.P., Zyryanov I.V. Assessment of durability of sectional pumps in underground kimberlite mines of ALROSA. Gornyy zhurnal = Mining Journal. 2017. № 10. pp. 41–44. (In Russ.).
2. Timukhin S.A., Aleksandrov V.I., Makharatkin P.N. Innovative Approach to the Design of the Main Mine Drainage Systems. Gornoe oborudovanie i elektromekhanika = Mining Equipment and Electromechanics. 2018. № 1. pp. 44–46. (In Russ.).
3. Dolganov A.V. Hydroabrasive wear and economical efficiency of the dewatering installations of mines and ore mines. Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining informational and analytical bulletin (scientific and technical journal). 2019. № 5 (Spec. Iss. № 9). pp. 3–8. (In Russ.).
4. Ovchinnikov N.P. The Operating Experience of Sectional Pumps in Underground Kimberlite Mine «Mir». Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta = Bulletin of the Kuzbass State Technical University. 2017. № 5. pp. 119–126. (In Russ.).
5. Timokhin Yu.V., Palamarchuk T.N. The research results of the axial forces of the rotor and automatic settings. Sbornik nauch. tr. Donetskogo instituta zheleznodorozhnogo transporta (Collection of the scientific papers of the Donetsk Institute of Railway Transport). 2017. № 45. pp. 32–42. (In Russ.).
6. Palamarchuk N.V., Timokhina V.Yu., Palamarchuk T.N. Causes of unsatisfactory operation of the automatic balancing devices of centrifugal high-pressure pumps. Sbornik nauch. tr. Donetskogo instituta zheleznodorozhnogo transporta (Collection of the scientific papers of the Donetsk Institute of Railway Transport). 2016. № 42. pp. 65–71. (In Russ.).
7. Ostrovskiy V.G., Peshcherenko S.N. Calculation of the Rate Hydroabrasive Wear Interstage Seal Oil Pump. Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Geologiya, neftegazovoe i gornoe delo = Bulletin of the Perm National Research Polytechnic University. Geology, oil and gas, and mining. 2012. № 5. pp. 70–75. (In Russ.).
8. Stan M. On the Durability of Centrifugal Pumps. Fiability and Durability. 2018. № 1. pp. 193–198.
9. Dolganov A.V. The influence of hydro-abrasive depreciation of excretory elements on exploitation qualities of rotary pumps at copper and pyrites pits. Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining informational and analytical bulletin (scientific and technical journal). 2015. № 8. pp. 181–186. (In Russ.).
10. Patel M., Kumar A., Pardhi B., Pal M. Abrasive, Erosive and Corrosive Wear in Slurry Pumps — a Review. International Research Journal of Engineering and Technology. 2020. Vol. 7. Iss. 3. pp. 2188–2195.
11. Shen Z., Li R., Han W., Quan H., Guo R. Erosion Wear in Impeller of Double-Suction Centrifugal Pump due to Sediment Flow. Journal of Applied Fluid Mechanics. 2020. Vol. 13. Iss. 4. pp. 1131–1142.
12. Serrano R.O.P., Santos L.P., Viana E.M.F., Pinto M.A., Martinez C.B. Case study: Effects of sediment concentration on the wear of fluvial water pump impellers on Brazil's Acre River. Wear. 2018. Vol. 8. pp. 408–409. DOI: 10.1016/j.wear.2018.04.018
13. Ovchinnikov N.P. One of the ways to increase the durability of the sectional pump balancing ring. Zapiski Gornogo instituta = Journal of Mining Institute. 2021. Vol. 248. pp. 312–318. (In Russ.).
14. Ovchinnikov N.P., Zyryanov I.V. Assessment of durability of sectional pumps in underground kimberlite mines of ALROSA. Gornyy zhurnal = Mining Journal. 2017. № 10. pp. 41–44. (In Russ.).