The method is presented in the article concerning numerical identification of corrosion and corrosion resistance of metals, which serves to determine the degree of hazard of the corrosive state of technical devices of hazardous production facilities. Currently, the causes of metal failure are determined by metallography, radiography, ultrasonic, color, magnetic particle inspection or sample testing. Risk of the development of corrosion processes, depending on the type of corrosion, the characteristics of its shape, the depth of corrosion damage and the area of the affected surfaces, is determined visually or by the instrumental detection methods. Numerical identification of the indicators of corrosion and corrosion resistance of metals, proposed in the work, is carried out taking into account the location of the corrosion process, the form of corrosion damage, the size, unevenness and depth of penetration of various types of corrosion, the degree of damage to the surface by uniform and local corrosion (spots, ulcers, pitting). At the same time, according to the initial size of surface and deep corrosion, the actual size of the corrosion wear of a structural element is determined, and according to the scheme of a typical type and characteristic of the form of corrosion damage, the type of corrosion is determined. Further, taking into account the corrosion hazard score in accordance with the scale of corrosion resistance, a numerical indicator of corrosion and corrosion resistance of the structural metal is determined.
Studies showed that the numerical identification of the indicators of corrosion and corrosion resistance of metals makes it possible to match the type of corrosion and the characteristics of the form of corrosion damage with the corrosion coefficient depending on the scheme of a typical type of corrosion damage. In addition, numerical identification shows the extent of damage to the surface by uniform and localized corrosion, including spots, pitting and other types of corrosion. Thus, it is applicable to determine the degree of corrosion hazard in assessing the technical condition and establishing the service life at any stage of the life cycle of equipment in hazardous industries.
The method is presented in the article concerning numerical identification of corrosion and corrosion resistance of metals, which serves to determine the degree of hazard of the corrosive state of technical devices of hazardous production facilities. Currently, the causes of metal failure are determined by metallography, radiography, ultrasonic, color, magnetic particle inspection or sample testing. Risk of the development of corrosion processes, depending on the type of corrosion, the characteristics of its shape, the depth of corrosion damage and the area of the affected surfaces, is determined visually or by the instrumental detection methods. Numerical identification of the indicators of corrosion and corrosion resistance of metals, proposed in the work, is carried out taking into account the location of the corrosion process, the form of corrosion damage, the size, unevenness and depth of penetration of various types of corrosion, the degree of damage to the surface by uniform and local corrosion (spots, ulcers, pitting). At the same time, according to the initial size of surface and deep corrosion, the actual size of the corrosion wear of a structural element is determined, and according to the scheme of a typical type and characteristic of the form of corrosion damage, the type of corrosion is determined. Further, taking into account the corrosion hazard score in accordance with the scale of corrosion resistance, a numerical indicator of corrosion and corrosion resistance of the structural metal is determined.
Studies showed that the numerical identification of the indicators of corrosion and corrosion resistance of metals makes it possible to match the type of corrosion and the characteristics of the form of corrosion damage with the corrosion coefficient depending on the scheme of a typical type of corrosion damage. In addition, numerical identification shows the extent of damage to the surface by uniform and localized corrosion, including spots, pitting and other types of corrosion. Thus, it is applicable to determine the degree of corrosion hazard in assessing the technical condition and establishing the service life at any stage of the life cycle of equipment in hazardous industries.
2. Rules for conducting industrial safety expertise: Federal norms and regulations in the field of industrial safety. 6-e izd., ispr. i dop. Ser. 26. Iss. 12. Moscow: ZAO NTTs PB, 2023. 20 p. (In Russ.).
3. Makhutov N.A. Safety and security of Russia. Legal, socio-economic, scientific and technical aspects. Resource management of operation of the high-risk facilities. Moscow: MGOF «Znanie», 2015. 600 p. (In Russ.).
4. GOST 9.908—85. Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices. Available at: https://docs.cntd.ru/document/1200007383 (accessed: July 04, 2023). (In Russ.).
5. GOST R 51372—99. Accelerated life and storable life test methods in special aggresive and other special media for technical products, materials and systems of materials. General. Available at: https://docs.cntd.ru/document/1200010714 (accessed: July 04, 2023). (In Russ.).
6. Kalandarov N.O., Goyibova D.F. Influence of corrosion on the equipment strength. Molodoy uchenyy = Young scientist. 2016. № 9 (113). pp. 171–173. (In Russ.).
7. Balezin S.A., Minkin V.V. Influence of the flow and composition of the medium on the corrosion rate of carbon steel in water. Korroziya i zashchita v neftegazovoy promyshlennosti RNTS = Corrosion and protection in the oil and gas industry of RNTS. Moscow: VNIIOENG. 1976. № 2. pp. 3–6. (In Russ.).
8. Kushnir V.N. Corrosion destruction and electrochemical protection of the oilfield tanks. Korroziya i zashchita v neftegazovoy promyshlennosti RNTS = Corrosion and protection in the oil and gas industry of RNTS. M.: VNIIOENG, 1976. № 3. pp. 50–51. (In Russ.).
9. GOST 34233.1—2017. Vessels and apparatus. Norms and methods of strength calculation. General requirements. Available at: https://docs.cntd.ru/document/556344844 (accessed: July 04, 2023). (In Russ.).
10. Method for diagnosing the technical condition and determining the residual resource of technological equipment of the oil refining, petrochemical industries. (DiOR-05). Available at: http://gostrf.com/norma_data/48/48689/index.htm (accessed: July 04, 2023). (In Russ.).
11. Tkachenko V.N., Nefedova Z.I., Kirilenko B.A. Investigation of the tread protection of the inner surface of the oilfield tanks bottom. Korroziya i zashchita v neftegazovoy promyshlennosti RNTS = Corrosion and protection in the oil and gas industry of RNTS... M.: VNIIOENG, 1975. № 11. pp. 19–22. (In Russ.).
12. Vorkov V.A., Kapralova E.O., Fedotenko M.A., Agafonov A.V. Research the influence of corrosion defects on durability of pipelines. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk = Proceedings of the Samara Scientific Center of the Russian Academy of Sciences. 2012. Vol. 14. № 1 (2). pp. 529–533. (In Russ.).
13. Fokin M.F. Evaluation of the pipes strength of the main pipelines with wall defects oriented along the circumference of the pipe according to the criterion for the occurrence of a leak before destruction. Prikladnaya mekhanika i tekhnologii mashinostroeniya: sb. nauch. tr. (Applied Mechanics and Engineering Technologies: collection of the scientific articles). Nizhniy Novgorod: Intelservis, 2005. pp. 69−76. (In Russ.).
14. Vansovich K.A., Beseliya D.S. Nakhlestkin A.A. Evaluation of the influence of fatigue defects of corrosion origin on the main pipelines strength from the standpoint of fracture mechanics. Available at: https://magazine.neftegaz.ru/articles/tsifrovizatsiya/507932-otsenka-vliyaniya-ustalostnykh-defektov-korrozionnogo-proiskhozhdeniya-na-prochnost-magistralnykh-tr/ (accessed: July 04, 2023). (In Russ.).
15. Yan Y.H., Gao J.H., Liu Y., Lei S.C. Recognition and classification of metal fracture surface models based on wavelet transform. Acta Metallurgica Sinica. 2002: Vol. 38. Iss. 3. pp. 309–314.
16. Reznik Ya. Identification of types of metals corrosion. Available at: https://aqua-therm.ru/articles/articles_196.html (accessed: July 04, 2023). (In Russ.).
17. Enikeev M.R., Maleeva M.A., Gubaydullin I.M. Study of the mechanism of corrosion damage development using computer vision. Zhurnal Srednevolzhskogo matematicheskogo obshchestva = Middle Volga Mathematical Society Journal. 2013. Vol. 15. № 3. pp. 70–75. (In Russ.).
18. Szunerits S., Walt D.R. Aluminum surface corrosion and the mechanism of inhibitors using pH and metal ion selective imaging fiber bundles. Analytical Chemistry. 2002. Vol. 74. Iss. 4. pp. 886–894.
19. Makhutov N.A. Safety and security of Russia. Legal, socio-economic, scientific and technical aspects. Scientific basis of industrial safety. Moscow: MGOF «Znanie», 2019. 824 p. (In Russ.).
20. Usmanov P.P., Chuchkalov M.V., Askarov P.M. The concept of accident-free operation and overhaul of the main gas pipelines of OAO Gazprom. Gazovaya promyshlennost = Gas Industry. 2015. № 1. pp. 28–31. (In Russ.).
21. GOST 13819—68. Unified Corrosion and Aging Protection System. Metals and alloys. Ten-point scale of corrosion resistance. Available at: http://www.normacs.ru/Doclist/doc/3FQO.html (accessed: July 04, 2023). (In Russ.).
22. Cherepanov A.P., Lyapustin P.K. Forecasting Resource as a Method of Increasing the Security of Technical Devices. IOP Conference Series: Materials Science and Engineering. 2017. Vol. 253 (1). DOI:10.1088/1757-899X/253/1/012004
23. Cherepanov A.P. Forecasting the resource of technical devices of the petrochemical industries. Angarsk: FBGOU VO «Angarskiy gosudarstvennyy tekhnicheskiy universitet», 2020. 224 p.
24. Cherepanov A.P. Method for determining the degree of wear of the equipment under the influence of corrosion. Patent № 2796240 R.F. Published: May 18, 2023. Bulletin № 14.